BMW E36 Link G4X PNP - Ace Performance Calibration File
- Brand
- Ace Performance
- Weight:
- 1.00 LBS
- Shipping:
- Calculated at Checkout
Related Products
Link G4X BMW e36 S50/M50 Plug in ECU
The BMW e36 Link is a direct plug in replacement of the factory BMW ecu. The factory ECU case is used to cover the Link board. A small modification to the case is needed to allow for a...
LINK G4X Xtreme WireIn ECU
Xtreme ECU - #G4XX Shipped locked and must be enabled before use. This increases security of shipping and provides information on when an ECU is first used for warranty purposes...
Link G4X Atom X Standalone ECU
The Link G4X Atom X is Link's entry level ECU that blows the opposition away - half the size, all the technology! Now with more refinements for the budget conscious. Full configurability, no preset...
Link G4X Storm X Plugin ECU
The Link G4X Storm engine management unit delivers performance that rivals any engine management system on the market. This ECU is more than capable of running sequential injection, ignition and...
Link G4X Monsoon X Wire in ECU
The MonsoonX has been upgraded to provide 512 megabytes of data logging, meaning you can log much more data at a faster sample rate. Control loops are also more precise compared to its G4+...
Description
ACE Performance base calibration is designed for use with the Link G4+ BMW e36 S50/M50 Plug in ECU
* = New
All look up tables expanded for greater resolution
Fueling :
* Fuel Modeling fully configured and functional
* Fuel and Ignition table blending via VANOS position (recommended)
24 32 pound fuel injector maps
MAP OR TP based fueling
4D fueling compensation (opposite of main fuel table)
5D BAP correction (Load as TPS)
Charge temp compensation
Cold start adjusted
Cold enrichment adjusted
Accel enrichment adjusted
Closed loop fully reconfigured (including wideband AV input advanced mode)
Injector timing adjusted
Ignition :
Dwell time adjusted
Idle ignition control enabled and fully configured
Transient ignition control enabled and fully configured
Engine temperature compensation
Inlet air temperature compensation adjusted
4D TP compensation enabled
5D BAP compensation enabled (Load as TPS)
Knock:
Frequency, windowing, retard/advance rate, and lockouts fully configured
Configured for individual cylinder detection
Gain per cylinder adjusted
Knock target table estimate
Bank 1 and 2 knock trim table configured
Aux outputs :
VANOS conditions include throttle position condition
Idle speed control fully reconfigured for closed loop, including PID adjustments, antistall, and
more.
ECU logging :
Fully preconfigured and enabled
CAN output :
Customized logging sets available that enable additional important runtimes. Compatible with
AIM preconfigurations and more.
*DYNO GRAPH is an ACE calibration on a 95 M3 with a 3.2L bottom end and stock cams and stock manifolds. This car had an Active Autowerk Track pipe and free flow exhaust.*
0 Reviews
Shipping & Returns
Returns Policy
If you are not satisfied with any purchase made with Ace Performance, notify us within thirty-six (36) hours of receiving the package. Items may only be returned if they differ from what you ordered (ie. we shipped the wrong part to you) or you suspect there may be a defect with an item. Fitment issues (ie. you ordered the wrong part) are not a valid reason to return an item, and no refund requests due to fitment issues will be honored. To return an item incorrectly shipped to you, or that you believe to be defective, you must obtain a Return Merchandise Authorization Number (RMA #). The goods must be returned within ten (10) days in the same condition and in the original packaging. If the merchandise is damaged, or not in the original packaging, or no valid RMA # appears on the outside packaging, no refund will be forthcoming and you own the original purchase. The customer will be responsible for all shipping charges.
Electronic items are subject to engineering inspection prior to a refund being issued. All electronic items are carefully tested and inspected prior to sale. All items sold by Ace Performance are new unless otherwise specified.
If you believe a product you receive from Ace Performance has any defect, please contact us immediately. In the unlikely event that any issue should arise with your purchase, we are very motivated to locate and resolve the cause of the problem. If a manufacturing problem has occurred, we will investigate the part once it is returned to us, and then check with the manufacturer. If a defect is determined, the defective part will be replaced at no additional cost to you, or if you prefer, we will provide a full refund.
Shipping
We ship throughout the US. Note that there are restrictions on some products, and some products cannot be shipped.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
